bt voyager 2091 uart

Yet another BT device: a voyager 2091 - another BCM6348 device. UART is nice and easy to get at; even has headers soldered in:

Here's the full boot output:
CFE version 1.0.37-21.6.8 for BCM96348 (32bit,SP,BE)
Build Date: Thu Sep 22 10:49:20 CST 2005 (michaelc@AskeyBrcmServer)
Flash Config: CS0(1f80000a,17),Base(bf800000),Size(8MB)
Ethernet Network Device: Internal PHY
Auto-negotiation timed-out
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.2
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name :
Default host flash file name : bcmModelName_fs_kernel
Boot delay (1-9 seconds) : 1
Board Id Name : V2091_BB
Psi size in KB : 24
Number of MAC Addresses (1-32) : 4
Ethernet MAC Address : 00:16:e3:1f:0d:1c
WEP 128bit Key : a986888aa527c
Memory size in MB : 16
==== Press space key to stop auto run (1 seconds) ====
Auto run second count down(before hit space key): 0
Code Address: 0x80010000, Entry Address: 0x8001046c
Decompression OK!
Entry at 0x8001046c
Closing network.
Starting program at 0x8001046c
Flash Config: CS0(1f80000a,17),Base(bf800000),Size(8MB)
FLASH_BASE bfc00000,blk 47
Total Flash size: 8192K with 135 sectors NVRAM @71 block
Scratch pad is not used for this flash part.
V2091_BB prom init
CPU revision is: 00029107
Primary instruction cache 16kb, linesize 16 bytes (2 ways)
Primary data cache 8kb, linesize 16 bytes (2 ways)
Linux version 2.4.17 (michaelc@AskeyBrcmServer) (gcc version 3.1) #1 Mon Sep 26 10:37:13 CST 2005
Determined physical RAM map:
memory: 00fa0000 @ 00000000 (usable)
On node 0 totalpages: 4000
zone(0): 4000 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock0 ro
bcm_console_setup
Calibrating delay loop... 239.20 BogoMIPS
Memory: 14112k/16000k available (1171k kernel code, 1888k reserved, 84k data, 48k init, 0k highmem)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
brcmboard: brcm_board_init entry
Module bcm63xx_cons.c v1.1 Sep 26 2005 10:37:30
block: 64 slots per queue, batch=16
PPP generic driver version 2.4.1
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Ebtables v2.0 registered<6>NET4: Ethernet Bridge 008 for NET4.0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 48k freed
init started: BusyBox v0.60.4 (2005.09.26-02:43+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
BusyBox v0.60.4 (2005.09.26-02:43+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
atmapi: init_module entry 0xc0015060
blaadd: blaa_detect entry
adsl: adsl_init entry
var 1.0 initialised
PCI: Enabling device 00:01.0 (0004 -> 0006)
wl: srom not detected, using main memory mapped srom info (wombo board)
wl0: Broadcom BCM4318 802.11 Wireless Controller 3.91.39.0
Broadcom BCM6348B0 Ethernet Network Device v0.1 Sep 26 2005 10:40:46 Ports 1 unit 1 Internal PHY
BCM63xx_ENET: Auto-negotiation timed-out
BCM63xx_ENET: 10 MB Half-Duplex (assumed)
eth0: MAC Address: 00:16:E3:1F:0D:1C
Broadcom BCM6348B0 USB Network Device v0.3 Sep 26 2005 10:40:47
usb0: MAC Address: 00 16 E3 1F 0D 1D
usb0: Host MAC Address: 00 16 E3 1F 0D 1E
USB Vendor id=069a, USB Product id=0318
==> Bcm963xx Software Version: 2.21.05.08m_A2pB018c1.d16d <==