sodnpoo.com

simple python client for mako's arduino iso7816 interface

Some hacked together client code for exploring smartcards using Mako's iso7816 arduino interface. It provides a pretty thin layer on top of Mako's sketch to allow you to specify an arbitrary byte stream and get a dump of the response back:

lee@markov:~/sketchbook/iso7816$ ./client.py /dev/ttyUSB0 00B2010C1c
===COMMAND===
00000000:  00 b2 01 0c 1c                                    |.....|

SW1: 90  SW2: 00
===RESPONSE===
00000000:  b2 70 1a 61 18 4f 07 a0  00 00 00 04 10 10 50 0a  |.p.a.O........P.|
00000010:  4d 41 53 54 45 52 43 41  52 44 87 01 01           |MASTERCARD...|

OK
  

There's a little logic to handle a 61 'more data available' response, to detect success or failure and to pull out the SW1/SW2 status bytes - apart from that the data is raw. The plan is to expand the protocol parsing as required.

Usage is straight forward; the first arg is the serial device, the second arg is the command as a hex string. The second arg can optionally be an 'R' - this performs the ATR reset process. Example usage:

Reset the card

lee@markov:~/sketchbook/iso7816$ ./client.py /dev/ttyUSB0 R
===COMMAND===
RESET

SW1: 90  SW2: 00
===RESPONSE===
00000000:  3b 6e 00 00 00 31 c0 71  d6 65 7d e4 01 11 a0 83  |;n...1.q.e}.....|

OK
  

Select the PSE directory

lee@markov:~/sketchbook/iso7816$ ./client.py /dev/ttyUSB0 00A404000E315041592E5359532E4444463031
===COMMAND===
00000000:  00 a4 04 00 0e 31 50 41  59 2e 53 59 53 2e 44 44  |.....1PAY.SYS.DD|
00000010:  46 30 31                                          |F01|

SW1: 61  SW2: 26
SW1: 90  SW2: 00
===RESPONSE===
00000000:  c0 6f 24 84 0e 31 50 41  59 2e 53 59 53 2e 44 44  |.o$..1PAY.SYS.DD|
00000010:  46 30 31 a5 12 88 01 01  bf 0c 0c c5 0a ff ff 3f  |F01............?|
00000020:  00 00 00 03 ff ff 03                              |.......|

OK
  

Get the PSE record (two commands as it doesn't yet handle the 6C 'more data available')

lee@markov:~/sketchbook/iso7816$ ./client.py /dev/ttyUSB0 00B2010C00
===COMMAND===
00000000:  00 b2 01 0c 00                                    |.....|

SW1: 6c  SW2: 1c
===ERROR===

lee@markov:~/sketchbook/iso7816$ ./client.py /dev/ttyUSB0 00B2010C1c
===COMMAND===
00000000:  00 b2 01 0c 1c                                    |.....|

SW1: 90  SW2: 00
===RESPONSE===
00000000:  b2 70 1a 61 18 4f 07 a0  00 00 00 04 10 10 50 0a  |.p.a.O........P.|
00000010:  4d 41 53 54 45 52 43 41  52 44 87 01 01           |MASTERCARD...|

OK  
  

Select the application

lee@markov:~/sketchbook/iso7816$ ./client.py /dev/ttyUSB0 00A4040007A0000000041010
===COMMAND===
00000000:  00 a4 04 00 07 a0 00 00  00 04 10 10              |............|

SW1: 61  SW2: 2b
SW1: 90  SW2: 00
===RESPONSE===
00000000:  c0 6f 29 84 07 a0 00 00  00 04 10 10 a5 1e 50 0a  |.o)...........P.|
00000010:  4d 41 53 54 45 52 43 41  52 44 87 01 01 bf 0c 0c  |MASTERCARD......|
00000020:  c5 0a 02 01 7f 00 47 00  02 ff ff 02              |......G.....|

OK
  

Read the AFL

lee@markov:~/sketchbook/iso7816$ ./client.py /dev/ttyUSB0 80A80000028300
===COMMAND===
00000000:  80 a8 00 00 02 83 00                              |.......|

SW1: 61  SW2: 0c
SW1: 90  SW2: 00
===RESPONSE===
00000000:  c0 77 0a 82 02 58 00 94  04 08 01 06 01           |.w...X.......|

OK
  

Pin mapping:

  • clk - D9
  • data - D12
  • reset - D10

Code:

#!/usr/bin/python
"""
lee@markov:~/sketchbook/iso7816$ ./client.py /dev/ttyUSB0 R
lee@markov:~/sketchbook/iso7816$ ./client.py /dev/ttyUSB0 00A4040007A0000000041010
"""

import sys
from time import sleep


def chunks(l, n):
  return [l[i:i+n] for i in range(0, len(l), n)]

#https://gist.github.com/7h3rAm/5603718
def hexdump(src, length=16, sep='.'):
	FILTER = ''.join([(len(repr(chr(x))) == 3) and chr(x) or sep for x in range(256)])
	lines = []
	for c in xrange(0, len(src), length):
		chars = src[c:c+length]
		hex = ' '.join(["%02x" % ord(x) for x in chars])
		if len(hex) > 24:
			hex = "%s %s" % (hex[:24], hex[24:])
		printable = ''.join(["%s" % ((ord(x) <= 127 and FILTER[ord(x)]) or sep) for x in chars])
		lines.append("%08x:  %-*s  |%s|\n" % (c, length*3, hex, printable))
	print ''.join(lines)

#################################################

command = ''
dumpcommand = ''

if len(sys.argv) != 3:
  print "help"
  quit()
else:
  portname = sys.argv[1]
  rawcommand = sys.argv[2]

  print "===COMMAND==="
  if rawcommand == 'R': #RESET
    print "RESET"
    print
    command = rawcommand
  else:
    for i in chunks(rawcommand, 2): #parse each two chars into chunks
      command = command +'.'+ chr(int(i, 16)) #then convert them to bytes and put the '.' in
      dumpcommand = dumpcommand + chr(int(i, 16))
    hexdump(dumpcommand)

#portname = "/dev/ttyUSB0"
#RESET = 'R'
#PROVIDER = '.\x00.\xA4.\x04.\x00.\x07.\xA0.\x00.\x00.\x00.\x04.\x10.\x10' #00A4040007A0000000041010
#command = RESET
#command = PROVIDER

e = 0
reading = False
SW1 = 0
SW2 = 0
line = []
    
with open(portname,"r+") as f:
  while f:
    b = f.read(1)
    if e > 64:
      e = 0
      print "SW1:","%02x" % ord(SW1)," SW2:","%02x" % ord(SW2)
      if SW1 == "\x90" and SW2 == "\x00":
        print "===RESPONSE==="
        hexdump(line[:-2])        
        print "OK"
        f.close()
        f = None

      elif SW1 == "\x61":
        #print "next","SW1:","%02x" % ord(SW1)," SW2:","%02x" % ord(SW2)
        f.write('.\x00.\xC0.\x00.\x00.')
        f.write(SW2)
        SW1 = "\x00"
      else:
        #uh oh
        print "===ERROR==="
        hexdump(line[:-2])
        f.close()
        f = None

      line = []

    if b:
      
      if b == 'A': #ack
        #print "ack"
        pass        
      elif b == '.':

        b = f.read(1)
        while not b:
          b = f.read(1)
        
        line.append(b)  
        #print "b:","%02x" % ord(b)
        SW1 = SW2
        SW2 = b
       
    else:
      e = e + 1
      sleep(0.01)
      
      if not reading:
        reading = True
        f.write(command)